Introducing "PIRONMAN" From Sunfounder. A Premium "Raspberry Pi 4" Case
Resume/Power ON after Power Failure Ability.
M.2 SSD or SDcard is NOT included in this sale.
This PIRONMAN case kit contains many parts and requires careful building prior to use. (Fully Detailed PDF instructions will be emailed directly after purchase.) Dimensions 4.43’’ x 2.69’’ x 4.68’’
You May Also Require: Pi4 Power Supply, SDcard and/or M.2 SATA SSD and Micro HDMI to HDMI Cable/Adaptor.
Goto the URL link at the top of the instruction book. Two types of board exist and a google search may not take you to correct area.
Take extra care with the ribbon cable connectors and familiarise yourself with the different ways they open. (V1 Boards ONLY Pull-Up or Flip-up)
Power Buttons/Display/LED will only work AFTER correct SUNFOUNDER software has been installed. (Do you have v1 or V2 board?)
Once the PIRONMAN Mainboard is connected, Only Power the Board/Case NEVER the Pi directly.
Connect a USB-C cable to the case's front USB-C port and the other end to a PC/Laptop and get direct access to the M.2 SATA drive. Perfect for imaging directly using RPI Imager. (No Power connected/required)
No OLED display and holding power 4-5 seconds does not safe shutdown? Check both ends of GPIO connectors/Ribbon Cables & Software.