Possibly the most ambitious and luxurious Raspberry Pi 4 case yet. At around 720gms & 152mm X 122 X 40 it definitely makes a statement, and an extremely positive one at that. The aluminium case/system provides both cooling and protection, while the front and rear acrylic panels ensure the best Wi-Fi/BT/IR signals are still achieved..
DeskPi Pro accepts either an internal Single M.2 drive (Key-B/Key-M) OR Single 2.5-inch SATA based HDD/SSD
"Drew/Pi-Maniac Note: With the V3 firmware case did support UASP /Trim however, it is not guaranteed. (i cant test ALL)
Remember, SATA/SSD speed is still FAST when compared to any SDCARD.
Below are my readings using a Samsung EVO 750 SATA SSD Using V3.FW
Timing cached reads: 1620 MB in 2.00 seconds = 845.81 MB/sec
All the ports of the Raspberry Pi are routed to the rear, say goodbye to long messy cables.
Micro HDMI ports converted to Full Size
No more need for Micro HDMI cables or Adaptors.
Expansion of 2 USB Ports + 2 on Rear
Type C power Port extends two front USB ports for USB devices like USB flash drive, gamepads, keyboard, and mouse.
Safe-Shutdown & Reset
After installing a driver, safe shutdown and Reset functions through the onboard MCU are available.
Built-in LP ICE Tower Cooler with PWM fan
Along with passive cooling, This specially designed Cooler supports adjustable fan temperature & speed control.
No more Under voltage Issues ⚡
The DeskPi Pro Supports PD 2.0 and QC 3.0 power input, Provides more than enough power for ANY Raspberry Pi 4.
** No AUS power supply exists AUS users will receive a discreet USA to AUS adaptor. I have however also been using mine on a standard Pi4 power supply without issues **
A Brand-new Low-profile ICE TOWER Fan/Cooler and a QC USB 3.0 5v 3amp power supply are included in the kit.
Note: Raspberry Pi and TF card are not included!
>>> Latest Drivers/Updates from HERE or HERE (Manual is/was out of date) <<<