
We Are Based in Cairns Australia (4870)
All Items Listed Are AUS Stock
** CM4 2GB LITE + WIFI Have Arrived! **
(China Lockdowns Still Affecting Some Of Our Stock Levels)
Possibly the most ambitious and luxurious Raspberry Pi 4 case yet. At around 720gms & 152mm X 122 X 40 it definitely makes a statement, and an extremely positive one at that. The aluminium case/system provides both cooling and protection, while the front and rear acrylic panels ensure the best Wi-Fi/BT/IR signals are still achieved..
DeskPi Pro accepts either an internal Single M.2 drive (Key-B/Key-M) OR Single 2.5-inch SATA based HDD/SSD
"Drew/Pi-Maniac Note: With the V3 firmware case did support UASP /Trim however, it is not guaranteed. (i cant test ALL)
Remember, SATA/SSD speed is still FAST when compared to any SDCARD.
Below are my readings using a Samsung EVO 750 SATA SSD Using V3.FW
Timing cached reads: 1620 MB in 2.00 seconds = 845.81 MB/sec
All the ports of the Raspberry Pi are routed to the rear, say goodbye to long messy cables.
Micro HDMI ports converted to Full Size
No more need for Micro HDMI cables or Adaptors.
Expansion of 2 USB Ports + 2 on Rear
Type C power Port extends two front USB ports for USB devices like USB flash drive, gamepads, keyboard, and mouse.
Safe-Shutdown & Reset
After installing a driver, safe shutdown and Reset functions through the onboard MCU are available.
Built-in LP ICE Tower Cooler with PWM fan
Along with passive cooling, This specially designed Cooler supports adjustable fan temperature & speed control.
No more Under voltage Issues ⚡
The DeskPi Pro Supports PD 2.0 and QC 3.0 power input, Provides more than enough power for ANY Raspberry Pi 4.
** No AUS power supply exists AUS users will receive a discreet USA to AUS adaptor. I have however also been using mine on a standard Pi4 power supply without issues **
A Brand-new Low-profile ICE TOWER Fan/Cooler and a QC USB 3.0 5v 3amp power supply are included in the kit.
Note: Raspberry Pi and TF card are not included!
>>> Latest Drivers/Updates from HERE or HERE (Manual is/was out of date) <<<
Pi-Mania was born from very humble beginnings back in early 2018. With a formal background in IT and a keen interest in all things technical Initially, we started to source and test some of the amazing Raspberry Pi Cases & Hardware we were seeing become available. A few "Retro Gaming & Pi-Hole" builds later, the seed was well and truly planted and along with our knowledge, beginning to grow. We began reaching out to key suppliers, searching, sourcing, and testing to find the most innovative, useful and must have products available. As fellow enthusiasts, we actually test and use the items we sell before passing them into the store. some products inevitably don't make it, but those that do we stand behind and proudly offer to YOU our most valued "Pi-Mania!" Customers.
Pssst! You can save an additional $1.95 @ Checkout using Code DI$COUNT (Once Per Customer)
Main Image/Photo by Karminski-牙医
These guys know their stuff. Highly Recommended. 10/10
Purchased a Deskpi Pro v2 and it arrived within a couple of days. I initially had some issues with the temperatures being higher than normal, but Drew and the team helped me troubleshoot the problem (which ended up being some faulty drivers for my 64bit OS!).The customer service you receive from Pi-Mania is second to none and I would not hesitate to order from them again!
Thanks, Drew for the coupon, a very happy customer. You were very helpful and I will happily recommend you guys.
Drew & Yo
Pi-Mania Founders
❤ Anything Raspberry Pi related.
❤ Emulation & Retro Gaming.
❤ Gadgets & Innovative technology.
❤ SBC/mITX Enthusiasts.